Επιστήμη και τεχνολογία

NOW We're Cook'n with Argon!!

Inert atmosphere for heat treating oven?
Don't adjust your TV, YOU HEARD THAT RIGHT!
I've wanted to try this upgrade since I first heard about it. Let's give it a try!
----
Music: Cemetary Clown - Sir Cubworth

Σχόλια 

  1. Curtis Atkinson

    Curtis Atkinson

    Πριν ώρα

    Hey Tony love your videos. That nose hair trimmer is actually for deburing copper pipe ID what it's original purpose is but does works on steel and much more just wears the blade down faster.

  2. Stanwood Dave

    Stanwood Dave

    Πριν 2 ώρες

    This anti-scale coating acts as a barrier to the basic reactions of oxidation and decarburization. To prevent scaling and decarburization, care is taken to apply a uniform coating layer on the component. The coating also reduces decarburization on billets and ingots during hot-forging and hot-rolling operations. Heat transfer from the heating medium to the metal is unaffected by the coating. Additionally, the coating has no reaction with the steel surface and no release of toxic fumes during use, heat treatment or storage. The coating is nonhazardous and economical to use.

  3. theSaltineKing

    theSaltineKing

    Πριν 11 ώρες

    Get 1.2mm nozzle and E3D Super Volcano and thank me later.

  4. 47vulcanride timmer

    47vulcanride timmer

    Πριν 11 ώρες

    hymmm rabbit soup!

  5. STARSHIP_TO_MARS

    STARSHIP_TO_MARS

    Πριν 19 ώρες

    Any plans for the follow up Gears video? Cutting gears on the mini lathe?

  6. Bryan Clifton

    Bryan Clifton

    Πριν ημέρα

    Liking the capstain microscope idea

  7. Thanasis Thomas

    Thanasis Thomas

    Πριν ημέρα

    Difference of dividinh deadand speed indexer on a video please

  8. Rubén Balea

    Rubén Balea

    Πριν ημέρα

    I hope the poor rabbit has found a new -hole- place to hide.

  9. Michael Exman

    Michael Exman

    Πριν ημέρα

    how are those soft jaws working for you!!!

  10. Jody Alberger

    Jody Alberger

    Πριν ημέρα

    i know im just one person, but please make more vids. maybe some about tig welding . or 3d printing

  11. Eric Barry

    Eric Barry

    Πριν ημέρα

    Hey Tony, got a story for you. I remember back in your "welding straight is hard" video you mention not wanting to see homemade trailers with "ToT taught me to weld this trailer" bumper stickers pulling 4 tons of cinderblock and my buddys bedroom set. I might need one of those stickers. While I was in welding class at college, someone took a Sawzall to my exhaust and almost got away with my catalytic converter. Apparently "cat" theft is on the rise again. Anyway, I took to my keyboard and went to your welding videos. Thanks to your tips and advice, I was able to fill the saw cuts in without scrapping the part! The biggest issue I had was welding the super thin wall tubing without blowing holes through the thing. Anyway, long story short, thanks for being a great welding instructor without being a welding instructor. (That sounded better in my head) I might make myself one of those bumper stickers. If you're ever in Albuquerque, don't drive behind a silver CR-V. (Hint, that's me in my self welded repair job!)

  12. Reid Fleming, World's Toughest Milkman

    Reid Fleming, World's Toughest Milkman

    Πριν ημέρα

    Hey Tone, why does wd40 smell so good?

  13. Reid Fleming, World's Toughest Milkman

    Reid Fleming, World's Toughest Milkman

    Πριν ημέρα

    Meet me after school over at the Maho

  14. steve pine

    steve pine

    Πριν ημέρα

    interesting subject Old Tony.. I have questions from the land of OZ.. Q1- was the steel contaminated ie oils from machining , hands , or the Rabbit butt joke. Q2- Not really a question ! Put the F/cutter in a box of steel no lid , fill with clean chips from the chip machine (when you get that working again) and give it a whirl.

  15. James Runyon

    James Runyon

    Πριν ημέρα

    You got a bunny! If I may. Get 2 or more. They're mentally healthier of they can bond. Also. I built mine a 4 story bunny cage. It's good

  16. ClericChris

    ClericChris

    Πριν ημέρα

    Why did I watch the rabbit eating grass?

  17. Dean S

    Dean S

    Πριν ημέρα

    I see you are horning in on Matthias' videos! I enjoy your videos even though I have no mills, metal lathes, welders etc. Thanks!

  18. Bruce Anderson

    Bruce Anderson

    Πριν ημέρα

    Time to switch to rumble!🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸

  19. Stephen Fowler

    Stephen Fowler

    Πριν ημέρα

    Lol the black noga piece is a deburring tool. 🤣😂

  20. Bob Noname

    Bob Noname

    Πριν 2 ημέρες

    Did tape number 22 from S.T.F.U air already

  21. ttsgeb

    ttsgeb

    Πριν 2 ημέρες

    I'm just here for the last minute.

  22. Vandal's Garage

    Vandal's Garage

    Πριν 2 ημέρες

    17:33 its finally everyone's favorite part... The Easter egg.

  23. Vandal's Garage

    Vandal's Garage

    Πριν 2 ημέρες

    Closing in on one million subscribers. Good for you, Tony.

  24. dellairam

    dellairam

    Πριν 2 ημέρες

    I found this channel by accident, but I'm not upset. You're funny and i like the way you explain everything in detail. What do you do with all of your metal scraps? (Besides feed it to your cat)

  25. devtrash

    devtrash

    Πριν 2 ημέρες

    as a new viewer. interesting concept. but you go off on too many tangents unrelated to the main content here.

  26. MIGHTY MOBTARDS

    MIGHTY MOBTARDS

    Πριν 2 ημέρες

    Just left the Q cult and am in search for a new Guru to worship. Not sure you fit the mind pull I need. Good luck in your journies! ;)

  27. John Kinsella

    John Kinsella

    Πριν 2 ημέρες

    For some reason the tooling rack reminds me of the earlier sonos devices. I smell me a project!

  28. Gickels McDoogle

    Gickels McDoogle

    Πριν 2 ημέρες

    man, you must have had some nasty cases of luck in your life

  29. Lucas Imark

    Lucas Imark

    Πριν 2 ημέρες

    Just be careful if you use bigger nozzles you might need a bigger hotend, like an e3d volcano

  30. Eric Vinnels-bell

    Eric Vinnels-bell

    Πριν 2 ημέρες

    At 4:36 it’s Deburring tool

  31. Daniel Ralston

    Daniel Ralston

    Πριν 2 ημέρες

    Hold the phone - is the Maho XYZ jog wheel complete? I sure would like to see a video about how you made that! I've been considering one for my mill.

  32. Mats Hemmingsson

    Mats Hemmingsson

    Πριν 2 ημέρες

    I have a recepi for stuffed rabbit........ 👌

  33. Two Dogs

    Two Dogs

    Πριν 2 ημέρες

    "Oy! That's no ordinary rabbit; he's got big pointy teeth an' a mean streak a mile wide! " - Tim, they guy from scene 34

  34. ADM1R4L

    ADM1R4L

    Πριν 3 ημέρες

    Dude that Z Axis is one squeaky boi

  35. yambo59

    yambo59

    Πριν 3 ημέρες

    Hey Hey-!! - enough of the gratuitously violent rabbit eating footage-!!

  36. 562949832A

    562949832A

    Πριν 3 ημέρες

    Wouldn’t a quench in water also lead to less Surface scale?

  37. Ziggy Davies

    Ziggy Davies

    Πριν 3 ημέρες

    Tony! Shocked you overlooked the possibility of just drilling a nozzle out then adjusting the slicer parameters of whatever the hole size was drilled.

  38. Sarah Loyd

    Sarah Loyd

    Πριν 3 ημέρες

    Superb video as always, I can't wait for the video where the rabbit takes up butt welding!

  39. DSSlocksmiths

    DSSlocksmiths

    Πριν 3 ημέρες

    I'm sure someone will have already pointed out that the Prusa will happily resume the print if you add more filament and hit resume. Welcome to that rabbit hole!

  40. ShuRugal Oorus

    ShuRugal Oorus

    Πριν 3 ημέρες

    yes, 1mm nozzles exist. I basically only print with a 1mm nozzle anymore, because i hate waiting 24+ hours for something large to print, and i don't print small things

  41. Drumkommandr

    Drumkommandr

    Πριν 3 ημέρες

    an E3D tool changer is what you need for your printer that much weight on a print head would screw your print quality

  42. César

    César

    Πριν 3 ημέρες

    "pull a rabbit out of your butt"... wait, you mean there is more than hands ?!

  43. Vladmir Putin

    Vladmir Putin

    Πριν 4 ημέρες

    You're going to have issues with a 1mm nozzle. 0.6 is going to be about as large as you can go without upgrading your heater block.

  44. Zfrenchy

    Zfrenchy

    Πριν 4 ημέρες

    OMG, I thought you where lost in the snow during Christmas, I didn't expect any video so soon. LOL (sarcastic) Happy New Year Tony.

  45. Tinfoilhatnutcase One

    Tinfoilhatnutcase One

    Πριν 4 ημέρες

    Microscope at Bible camp😅😂🤣😁🤗

  46. Ahman Millener

    Ahman Millener

    Πριν 4 ημέρες

    I said it before, You're stupid, in a funny way! Happy New yeast. Oops Type: O

  47. Fred Nordhorn

    Fred Nordhorn

    Πριν 4 ημέρες

    I have tried to find an eMail address for This Old Tony. But having problems finding one. I have some items i would like to send to him. AKA Abenaki Prepper.

  48. Mustakari

    Mustakari

    Πριν 4 ημέρες

    Where is YOUR Odysee channel Old Tony?

  49. Graham Snuggs

    Graham Snuggs

    Πριν 4 ημέρες

    Is that metric or imperial grass??

  50. Leo Domingues

    Leo Domingues

    Πριν 4 ημέρες

    I think you should stop turning your pets in to other animals. Transmutation in the home shop, close to a time traveling lathe is dangerous!!!

  51. Steve Nichols

    Steve Nichols

    Πριν 5 ημέρες

    Thank you Loved the end :-)

  52. Backlash

    Backlash

    Πριν 5 ημέρες

    TOT, a couple months ago in "Consoling a Milling Machine" you talked about adding independent MPGs to your CNC Mill. How goes it? I have similar desires.

  53. Colin Mitchell

    Colin Mitchell

    Πριν 5 ημέρες

    HOW DID I END UP ON RABITTOK!?

  54. electro_sans 0

    electro_sans 0

    Πριν 5 ημέρες

    ✝️God loves you so much ! Jesus is king ! ✝️

  55. andy bowyer

    andy bowyer

    Πριν 5 ημέρες

    Jeez Tony! I've missed your dry wit!...lubetube decided to wipe you off of my notifications 🖕well your back now!!!!

  56. Luke Arts

    Luke Arts

    Πριν 5 ημέρες

    Remember your ultrasonic knife? Check out slow-mo guys grgone.info/will/z5-heoSMebpwtaM/b-nteo they may have invented the ultrasonic precision drill... What would happen if ToT pimps that ride into a tungsten tip impact hammer and tried it on, say "Lumenum" and "Ye Milde Steele" XD

    • Luke Arts

      Luke Arts

      Πριν 5 ημέρες

      Inquiring minds need to know!

  57. Nathan Dean

    Nathan Dean

    Πριν 5 ημέρες

    or just make one. you like making stuff.

  58. red or dead

    red or dead

    Πριν 5 ημέρες

    Think ill watch the greatest american hero now

  59. red or dead

    red or dead

    Πριν 5 ημέρες

    So glad you've found fame again now that everybody loves Raymond is over!

  60. Fabian Gallinat

    Fabian Gallinat

    Πριν 5 ημέρες

    Hey Toni the tool at 4:36 is for deburring holes

  61. leslie nixon

    leslie nixon

    Πριν 5 ημέρες

    Did you really use that without tempering it ?

  62. Dave's Workbench

    Dave's Workbench

    Πριν 5 ημέρες

    Yeah 3d printing takes ages But you're a natural. The oxygen joke😂😂😂

    • Dave's Workbench

      Dave's Workbench

      Πριν 5 ημέρες

      That explosion got me😑 Okay, the last 2 minutes makes up for it🥺

    • Dave's Workbench

      Dave's Workbench

      Πριν 5 ημέρες

      Good to see something made here in mississippi, and that other tool looks like a deburring tool

  63. Ralph Macchiato

    Ralph Macchiato

    Πριν 5 ημέρες

    Another YTber list his luster

  64. strongspeed

    strongspeed

    Πριν 6 ημέρες

    what kind of oven is that

  65. Original WD-40 UK

    Original WD-40 UK

    Πριν 6 ημέρες

    Love the video, let us know if you run out of WD-40 stuff @17:09 we can arrange some to be sent your way . WD-40.

  66. John A. Tamplin

    John A. Tamplin

    Πριν 6 ημέρες

    I had to lookup Ralph Hinkley.

  67. Johnny Zander

    Johnny Zander

    Πριν 6 ημέρες

    I am deeply surprised that the rabbit came out white... 0_o

  68. Some Canine

    Some Canine

    Πριν 6 ημέρες

    at 4:28 that's a deburring tool for when you cut sections of pipe. I don't know what the official name is but we had it in a machine shop I used to work at.

  69. ceerw buty

    ceerw buty

    Πριν 6 ημέρες

    The end is definitely my favourite part of the show. Definitely.

  70. MagentaPuppy - Blender Simulations

    MagentaPuppy - Blender Simulations

    Πριν 6 ημέρες

    Furnaces aren’t that cool, 3D printers are much cooler

    • Nostromo

      Nostromo

      Πριν 5 ημέρες

      Fridges are cooler than both of those..........

  71. kinder riegel

    kinder riegel

    Πριν 6 ημέρες

    Which CAD-programm do you use?

    • ceerw buty

      ceerw buty

      Πριν 6 ημέρες

      They are such a mood

  72. Alex Garrido

    Alex Garrido

    Πριν 6 ημέρες

    Man... Out of all the infinite worlds out there in the multiverse, I'm really glad ThisOldTony decided to make these AMAZING videos and upload them to youtube! Thank you good sir for putting all the hard work on these videos full of useful information that are still incredibly hilarious!

  73. TFR

    TFR

    Πριν 7 ημέρες

    you probably wont respond but what materials can you turn on a chinese mini lathe??

  74. Rusty Shackleford

    Rusty Shackleford

    Πριν 7 ημέρες

    16:50 crushed me.. love the "Subscribe 180" as well. Thanks Tony!

  75. Jon Blais

    Jon Blais

    Πριν 7 ημέρες

    When he was at the bench grinder on the wire wheel I was waiting to hear something fly across the room

  76. Swordof theLord

    Swordof theLord

    Πριν 7 ημέρες

    16:51 nearly crapped myself :)

  77. vagabonpanda

    vagabonpanda

    Πριν 7 ημέρες

    I like when you cooked your finger, made me laugh we are all human I guess. Bunny's are the most underrated pet of all time.

  78. revb0

    revb0

    Πριν 7 ημέρες

    You got to try an heat treat the rabbit.... with a few potato's and veg.

  79. Martinguy

    Martinguy

    Πριν 7 ημέρες

    Jumped out my skin with the explosion 😆

  80. Dan Marafino

    Dan Marafino

    Πριν 7 ημέρες

    You'll want to go to a beefier heater block to do high volume printing. You'll overrun the standard E3D v6 quickly even on a .6 nozzle (You can go up to .4 layer height and 1.2mm line width). An E3D Volcano is the way to go.

  81. daniel escobedo

    daniel escobedo

    Πριν 7 ημέρες

    Stoked to see you coming up on one million subs Tony, keep up the great work, love your videos

  82. SquidCaps

    SquidCaps

    Πριν 7 ημέρες

    Nozzle changes: use one type of nozzle, do not mix and match from different patches. Check that they are all identical lengths, when it comes to the threaded section. Change them when warm. Mixing different type of nozzles can end up with a dreaded blob but so far, using just one type, sourced from the same place has worked fine. Also: it is fairly easy to miss the threads and screw it in wonky, ruining the hot end in the process, use a drill bit and fingers, don't use power tools.

  83. molak34

    molak34

    Πριν 7 ημέρες

    17:33 subscribe 180 ? XD

  84. Lostboy

    Lostboy

    Πριν 7 ημέρες

    And that’s what I get for reading the comments before the episode is over. “ The rabbit stole the show”. It certainly did.

  85. fire surfer

    fire surfer

    Πριν 8 ημέρες

    You could 'gasp' use wood and a router to make that stand. edit: that's where my old collet went to. 18:40

  86. spblackey

    spblackey

    Πριν 8 ημέρες

    TAZ has a supported 1.2mm nozzle.

  87. Jeff Dahl

    Jeff Dahl

    Πριν 8 ημέρες

    My cat is watching your website very carefully! Licking her chops.

  88. Jeff Dahl

    Jeff Dahl

    Πριν 8 ημέρες

    Hey Tony, I love all your videos, and your presentation rocks! When ever I need to get in a better mood, I watch your videos. Sorry I'm going off track here, I don't know how to email you so, I was wondering if you have seen those 100ton boxes at the place they call the serapeum, in Egypt? Whats your thought how they were made? The only reason I ask is because they are precision and you are the best when it comes to that and you can make anything. I know you don't work with stone but I would love to hear what you think. They tell everybody that they were made with copper chisels. There is no way! Would love to hear what you think.

  89. Gacheru Mburu

    Gacheru Mburu

    Πριν 8 ημέρες

    😁😂👍

  90. Johnny Dingo

    Johnny Dingo

    Πριν 8 ημέρες

    Eh, what's up doc ?

  91. Thomas Guthrie

    Thomas Guthrie

    Πριν 8 ημέρες

    If you pulled a vacuum on the oven before adding the argon, would you have less scale?

  92. Sailing DreamOn

    Sailing DreamOn

    Πριν 8 ημέρες

    You kidding you don't know a de-burr tool!? That's either a joke 🤣 got me, or I'm flabbergasted

  93. j2681

    j2681

    Πριν 8 ημέρες

    I gave you a thumbs up for the rabbit

  94. KJS UD

    KJS UD

    Πριν 8 ημέρες

    You've 3D printed a tool squatty potty

  95. Brumock

    Brumock

    Πριν 8 ημέρες

    This came out while i was in the hospital for a stroke and was the only thing i looked forward to watching when i finally got home

  96. HipNerd

    HipNerd

    Πριν 8 ημέρες

    LotR special: Cooking with Aragorn.

  97. Jay Straw

    Jay Straw

    Πριν 8 ημέρες

    What Joe Don Baker movie did the threatening music come from?

  98. Paul Bialozor

    Paul Bialozor

    Πριν 8 ημέρες

    Allow me to play Captain Obvious and ask, how can Argon fully replace the air if there is only a single inlet? Seems to me that if you want to get the air out to replace with Argon then there'd need to be some sort of exit hole. Perhaps the Argon simple mixes with the Air thereby decreasing the Air's ability to destroy, or gunk up, the part. Maybe you might need to apply the Argon, along with the part, the night before and allow the Argon to completely absorb or mix with the Air; then the next day heat up the Part... Clearly I am clueless and stating the obvious but am curious to know... Cheers...

  99. Just some Guy

    Just some Guy

    Πριν 8 ημέρες

    I actually jumped a little when the flu cutter exploded. Ya got me

  100. Echo_Hotel

    Echo_Hotel

    Πριν 8 ημέρες

    My wife is very disappointed that she was shortchanged a minute of bunny.

Επόμενο